Skip to content
A long red-coated fire main running along a concrete wall on the BELCO power station site in Bermuda

Job 01 / 6 / BWSC · 2019

BELCO Power Station

Hamilton, Bermuda

60MW

New-build 60MW heavy oil power station

Fire mainsHydrantsSuppressant systems

BWSC brought KBVI out to Hamilton to put in every fire main on the BELCO power station, a new-build 60MW heavy oil plant that came online in 2019. The crew fabricated and installed the lot. External fire hydrants around the site, internal fire hose connection points inside the buildings, and fire suppressant systems, including the sets protecting the electrical gear and the transformers. The red-coated main on the homepage was run on this job.

  • 01Fabrication and installation of all fire mains on site
  • 02External fire hydrants
  • 03Internal fire hose connection points
  • 04Fire suppressant systems on electrical systems and transformers

From the job

19 frames · KBVI's own photographs · no stock, no renders

Large red-coated fire main running along a concrete retaining wall toward the power station
Blue gate valve flanged into the black-coated buried main in an open trench
Red fire main running along the top of the transformer bays, seen from height
Black-coated fire main bedded on timber bearers down a shored trench, capped at the near end
Fire main pipework being installed on site in Bermuda
Blue gate valve bolted between two coated sections of the fire main in the trench
Red fire main running through the engine hall past the generating sets
Red fire main turning up out of the ground into a flanged spool and gate valve
Red external fire hydrant with a gate valve, flanged into a buried main
Red fire pipework and fittings on the Bermuda site
Red-coated fabricated tee and a bevelled pipe end on the site bench
Long red fire main mounted along a concrete wall with the plant behind
Black-coated fire main up on stands at dusk, with the plant and storage tanks behind
Red fire riser turning down into a black buried pipe against a concrete wall
Red fire hydrant standing off the buried main, the black-coated pipe running away down the trench
Fire suppression pipework near plant equipment
Coated fire main pipework on the BELCO site
Prefabricated black-coated fire main spool set up on stands on site
Lengths of large-bore black-coated fire main laid out on the ground beside the power station build

Send the drawings.
Get a straight answer.

One email and the pipework starts moving. Your job gets priced by the crew that welds it and stands on the site from first spool to final test.